If you edit the wiki article, please do not add yourself here your contributions are recorded on each article's associated history page. U-Boot supports the ext2/3/4 filesystems as well as fat. This is U-Boot script for a Zedboard: loadaddr0x02000000 uenvcmdecho Booting RTEMS Zed from net set. The current i.MX documentation is in the root directory so we cannot easily check which one is i. For a comprehensive list of all possible directives you can use in nf. Configure U-Boot to network boot using the TFTP protocol. MX documentation included in the U-Boot doc directory. The bootloader first loads the devicetree, kernel and ramdisk, and then executes the kernel providing it with additional information such as the name of the device holding the root filesystem. conf is located, as exemplified in the U-Boot documentation. They are listed here because wiki history does not allow for any external attribution. U-Boot is the bootloader for all i.MX6 devices. Here are the relevant excerpts from the documentation: From the wireshark logs, Im able to see that the BOOTP requests are happening and the u-boot-spl.bin file is fetched and served. Much of the information here is taken directly from the U-Boot source, with supplemental material added as needed (or at least as we managed to add it - probably notall that is needed). Johnson, Alex Tarkovsky, Alexey Shvetsov, Raúl Porcel, Joshua Saddler on April 28, 2013. I have a BeagleBoard derivative and have followed the documentation provided in the SDK to enable loading the SPL and u-boot from a TFTP server. U-Boot API documentation These books get into the details of how specific U-Boot subsystems work from the point of view of a U-Boot developer. The following people contributed to the original document: Mike Frysinger, Ned Ludd, Robin H. This page is based on a document formerly found on our main website. See Cross build environment.Īfter compiling a new Gentoo kernel, copy the resulting zImage from /usr/src/linux/arch/arm/boot/zImage to the boot partition (replacing the existing zImage).
U boot documentation download#
Setup U-boot And Toolkits 2.1 Download U-boot-1.1. It is most likely the build will be cross-compiled. 1.3 U-boot For LPC2294 Since the u-boot has supported range of CPU architectures including ARM (ARM7, ARM9, StrongARM, Xscale) while LPC2294 is a base-on-supported-arm7 processor, it is possible, as well as useful, to provide the u-boot firmware as the LPC2294 bootloader. There is a package for the Das U-boot utility tools (such as mkimage), see u-boot-tools. Follow the instructions in the documentation for obtaining the source from git or an archived release. The 'MLO' file is provided by U-Boot's Secondary Program Loader (SPL) functionality. This requires special formatting of the SD card and copying of the 'MLO' file to the SD card. There is no package for the Das U-boot source code. On Ubuntu: Typical boot process for BeagleBoard using U-Boot includes two U-Boot phases: The BeagleBoard ROM bootloader first loads a file called 'MLO' from the SD card. Rather than duplicate existing information, please consult the upstream documentation and their main wiki.
0 kommentar(er)
